محصولات ارتباطی سپیتام

PoE سوییچ صنعتی 8 پورت 100/1000mbps دارای 2 پورت SFP و مدیریتی

امتیاز :
کد محصول : Sepitam-PI208G-DFM
'/>

سوئیچ مدیریتی دارای 8 پورت به صورت PoE

هر 8 پورت دارای پهنای باند mbps 10/100/1000

دارای دو پورت آپلینک  SFP

همه پورتها به صورت Auto Negotiation & Auto MDI/MDIX

با قابلیت پشتیبانی از پروتکلهای WEB ,CLI ,TELNET, SSH ,SNMP

کارکرد در لایه 2  به صورت هوشمند، با سطح بالای مدیریت، امنیت و کیفیت (QoS)

پشتیبانی از قابلیتهای 802.1Q VLAN ,Mirroring ,Port isolation ,IGMP Snooping ,DHCP Snooping ,LLDP

دارای قابلیت POE+ management

توان 15.5/25.5 وات برای هر 8 پورت PoE

پهنای باند:Gbps  20(Non-blocking) 

بافر مموری: 4MB

استفاده از Military-Grade Chip با قابلیت فوق پایدار

دارای سطح 2 محافظت در برابر رعد و برق

دمای عملکرد از C °40  - تا ° 80+ ​  

مقاوم در برابر ارتعاشات مغناطیسی

دارای قابلییت ذخبره انرژی و محافظت محیطی

کیس فلزی مستحکم با سطح حفاظتی 40 IP

طراحی Din Rail جهت استفاده در رکهای صنعتی

میانگین نرخ زمان خطا (MTBF): 500.000 hours

ابعاد: 165x145x45mm 

وزن: g1000

 


 




This Industrial Gigabit smart L2+ PoE switch  prepare a field that power and data can feed from a single point, using Power over Ethernet (PoE) over a single cable. One eight Gigabit Ethernet ports and one console port  it prepared any 10/100/1000 Mbps ,all ports can supply industry-standard IEEE 802.3af power for every POE standard devices. It provides the ideal combination of affordability and capabilities for entry level networking of industrial, enterprise application which demands industrial, surveillance, IP Phone, IP Camera or Wireless applications, thus helps you create a more efficient workforce. 

Regards to using advanced auto-sensing algorithm the Sepitam-PI208G-DFM gives power only to IEEE802.3af front-end devices, so don't worry about connecting PoE or non-PoE devices to this   feeder. Additionally, this good gives up the power when PoE devices are disconnected. Intelligently, this manageable PoE Sepitam-PI208G-DFM can recognized automatically PoE demands of devices, speed, duplex, and cable type using Auto Uplink™. 

Sepitam-PI208G-DFM made by high quality of components were rigorous screened, have   superior performance in stability, environmental adaptability. It can work normally in very cold     environment to very hot from -40̊c to +80 ̊c. The product planned in a way of better resistance and  ability to  corrosion and   electromagnetic   interference. Power input also made a suitable and reliable types of power, to get more powerful suitability to environment.

 

Product

10-Port Managed Industrial POE Switch Sepitam-PI208G-DFM

Performance (Switching capacity and forwarding rate)

Switch Processing Scheme

store-and-forward

Auto-Negotiation for Full-duplex Mode and Half-duplex Mode.

RJ-45 port supports Auto MDI/MDI-X.

 

Standards Compliance

IEEE802.3: CSMA/CD

IEEE802.3i: 10Base-T

IEEE802.3u: 100Base-T

IEEE802.3ab: 1000Base-T

IEEE802.3z: 1000Base-LX

 

Power

Removable 6 green terminal wiring

Power requirements: DC48V 2.5A

 

Casing

Aluminum case– IP40- DIN RAIL Type

 

Buffer Memory

Capacity in Millions of Packets per Second (mpps) (64-byte packets)

4M

13.39Mpps

Switching Capacity in Gigabits per Second (Gbps) (Bandwidth)

Forwarding Rate

20G

13.39Mpps@64byts

Interface

Ports

8x 10/100/1000Base-T ports + 2x gigabit SFP slots + 1 console port

Layer 2 Switching

Spanning Tree Protocol (STP)

Standard Spanning Tree 802.1d

Rapid Spanning Tree (RSTP) 802.1w

G.8032 ERPS

<50ms ring protection for industrial high reliable application

Aggregation

Link Aggregation Control Protocol (LACP) IEEE 802.3ad;

Up to 7 groups ;Up to 14 ports per group

VLAN

Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs) ;Port-based VLAN; 802.1Q tag-based VLAN

IGMP v1/v2 snooping

IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1024 multicast groups (source-specific multicasting is not supported)

Security

Secure Shell (SSH) Protocol

SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported

Secure Sockets Layer (SSL), HTTPS

SSL encrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch

Port Security

Locks MAC Addresses to ports, and limits the number of learned MAC addresses

DHCP Snooping

prevent unauthorized configuration and use of IP addresses, while providing support for IP Source Guard and ARP detection

IP Source Guard

Prevents datagram with spoofed addresses from being in the network

ARP Inspection

Prevent ARP spoofing attacks and ARP

Storm control

Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port

ACLs

Support for up to 256 entries; Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag

Quality of Service

Hardware

Support 8 hardware queues

Scheduling

8 COS queues per port support strict priority and weighted round-robin (WRR)

Classification

Port based; 802.1p(PCP) VLAN priority based;

Rate Limiting

Ingress police regress shaping and rate control ;per VLAN, per port and flow based

Management (Web/ SSL, Telnet/ SSH, ping, Trivial File Transfer Protocol (TFTP), SNMP, Syslog)

Web GUI interface

Built-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and monitoring

Dual Image

Dual image provides independent primary and secondary OS files for backup while upgrading

Firmware upgrade

Web browser upgrade (HTTP/ HTTPs) and TFTP; Upgrade through console port as well

Port mirroring

Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported.

Other management

Single IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable diagnostics; ping; syslog; Telnet client (SSH secure support)

Green Ethernet

Green and Energy-saving Ethernet (EEE)

Compliant IEEE802.3az Energy Efficient Ethernet Task Force. Automatically turns off power on Gigabit Ethernet RJ-45 port when detecting link down or Idle of client. Active mode is resumed without loss of any packets when the switch detects the link up

Cable length detection

Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter.

General

Jumbo frames

Frame sizes up to 9KB supported on Gigabit interfaces

MAC Table

Up to 4K MAC addresses

Discovery

Link Layer Discovery Protocol (LLDP)

Used by network devices for advertising their identities, capabilities, and neighbors on a IEEE 802 local area network, principally wired Ethernet.

PoE

PoE Standard:

IEEE802.3af/IEEE802.3at

Max. PoE Power Per Port:

15.4W (IEEE 802.3af) /
30W (
IEEE 802.3at)

PoE Ports:

8 ports support PoE

Power Type:

End-span (Mid-span optional)

Minimum Requirements

Web browser: Mozilla Firefox version 2.5 or later, Microsoft Internet Explorer version 6 or later;

Category 5 Ethernet network cable;

TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in network

Environmental (preliminary)

Dimensions

165x145x45mm

Working Environment

Operating temperature: -40̊c to 80 ̊c ;

Storage temperature: -40̊c to 80 ̊c;

Operating humidity: 10% to 95% , relative, non-condensing